HPSC SDE Syllabus 2024 & Exam Pattern PDF Download: The Haryana Public Service Commission has released the Haryana SDE Syllabus 2024 and HPSC SDE New Exam Pattern 2024 on their official website. Candidates can download the HPSC Sub Divisional Engineer Syllabus 2024 and HPSC Sub Divisional Engineer Exam Pattern 2024 through this article. Those who aspire to be selected for the HPSC Sub Divisional Engineer posts need to prepare well for the exam. Therefore, we have provided the HPSC SDE Civil Syllabus 2024 here, based on the notification released by the officials. The HPSC Sub Divisional Engineer Exam will consist of 100 questions carrying 100 marks, and candidates will have 2 hours to complete the first stage of the examination.
HPSC SDE Syllabus 2024
The HPSC SDE New Exam Pattern 2024, released by the officials, reveals that the selection process will consist of 3 stages. The First Stage of the Examination is the Screening Test, followed by the Second Stage of the Examination, which is the Subject Knowledge Test. This stage will carry 150 marks and have a duration of 3 hours. The Third Stage of the Examination is the Interview, which will hold a 12.5% weightage. Further details on the HPSC SDE Civil Selection Process and Exam Pattern can be found in the following sections.
HPSC SDE Syllabus 2024 – Details
Latest HPSC SDE Civil Syllabus 2024 | |
Organization Name | Haryana Public Service Commission (HPSC) |
Post Name | Sub Divisional Engineer (Civil) in Development and Panchayat Department, Haryana |
Category | Syllabus |
Selection Process | Stage 1 – Screening Test, Stage 2 – Subject Knowledge Test, Stage 3 – Interview |
Job Location | Haryana |
Official Site | hpsc.gov.in |
HPSC SDE Selection Process
- First Stage of Examination:- Screening Test
- Second Stage of Examination:- Subject Knowledge Test
- Third Stage of Examination:- Interview
HPSC SDE Exam Pattern 2024
Check out the HPSC Sub Divisional Engineer Exam Pattern 2024 for First Stage, Second Stage Exam from this section. The below table helps you to gather complete and clear information about the HPSC SDE New Exam Pattern 2024.
HPSC SDE Stage 1 Exam Pattern
Topics | Number of Questions | Marks |
First Stage Examination – Screening Test | ||
|
100 | 100 |
Note:
- Time duration of the exam: 02 hours
- All questions carry equal marks.
- Each question will have five options. The fifth option will be meant lor a situation where a candidate intends to leave the question un-attempted.
- Negative Marking – One-fourth mark will be deducted for each wrong answer
- In case a candidate neither attempts a question nor darkens the fifth option/ bubble, then One-fourth mark will be deducted for each such question.
- The question paper will be in English
- A candidate will have to secure a minimum of 25% marks to clear the screening test
HPSC SDE Stage 2 Exam Pattern
Paper | Time Duration | Marks |
First Stage Examination – Subject Knowledge Test | ||
Paper will be Subjective Type (As Per Below Syllabus) | 3 hours | 150 |
Note:
- The question paper will be in English.
- No candidate will be called for the interview viva-voce test unless she/ he secures a minimum of 35% marks in the test.
- The weightage ofthe second stage test will be 87.5%
HPSC SDE Syllabus 2024
Structural Engineering
- Engineering Mechanics: System of forces, free-body diagrams, equilibrium equations; Internal forces in structures; Friction and its applications; center of mass; Free Vibrations of undamped SDOF system.
- Solid Mechanics: Bending moment and shear force in statically determinate beams; Simple stress and strain relationships; simple bending theory, flexural and shear stresses, shear center; Uniform torsion, Transformation of stress; buckling of column, combined and direct bending stresses.
- structural Analysis: Statically determinate and indeterminate structures by force/ energy methods; Method of superposition; Analysis trusses, arches, beams, cables, and frames; Displacement methods: Slope deflection and moment distribution methods; Influence lines; Stiffness and flexibility methods of structural analysis.
- Construction Materials and Management: Construction Materials: Structural Steel – Composition, material properties, and behavior; Concrete – Constituents, mix design, short-term and long-term properties. Construction Management: Types of construction projects; Project planning and network analysis – PERT and CPM: Cost estimation.
- Concrete Structures: Working stress and Limit state design concepts; Design of beams, slabs, columns; Bond and development length; Prestressed concrete beams.
- Steel Structures: Working stress and Limit state design concepts; Design of tension and compression members, beams and beam-columns, column bases; Connections – simple and eccentric, beam-column connections, plate girders, and trusses; Concept of plastic analysis – beams and frames.
Geotechnical Engineering
- Soil Mechanics: Three-phase system and phase relationships, index properties; Unified and Indian standard soil classification system; Permeability – one-dimensional flow, Seepage through soils – two – dimensional flow, flow nets, uplift pressure, piping, capillarity, seepage force; Principle of effective stress and quicksand condition; Compaction of soils; One-dimensional consolidation, time rate of consolidation; Shear Strength, Mohr’s circle, effective and total shear strength parameters, Stress-Strain characteristics of clays and sand; Stress paths.
- Foundation Engineering: Sub-surface investigations – Drilling bore holes, sampling,
plate load test, standard penetration, and cone penetration tests; Earth pressure theories – Rankine and Coulomb; Stability of slopes – Finite and infinite slopes, Bishop’s method; Stress distribution in soils – Boussinesq’s theory; Pressure bulbs, Shallow foundations – Terzaghi’s and Meyerholfs bearing capacity theories, effect of water table; Combined footing and raft foundation; Contact pressure; Settlement analysis in sands and clays; Deep foundations – dynamic and static formulae, Axial toad capacity of piles in sands and clays, pile load test, pile under lateral loading, pile group efficiency, negative skin friction.
Water Resources Engineering
- Fluid Mechanics: Properties of fluids, fluid statics; continuity, momentum, and energy equations and their applications; potential flow, Laminar, and turbulent flow; Flow in pipes, pipe networks; Concept ofboundary layer and its growth; Concept oflift and drag.
- Hydraulics: Forces on immersed bodies; Flow measurement in channels and pipes; Dimensional analysis and hydraulic similitude; channel Hydraulics – Energy-depth
relationships, specific energy, critical flow, hydraulic jump, uniform now, gilaulty varied flow and water surface profiles. - Hydrology: Hydrologic cycle, precipitation, evaporation, evapo-transpiration, watershed, infiltration, unit hydrographs, hydrograph analysis, reservoir capacity, flood estimation, and routing, surface run-off models, ground water hydrology – steady state well hydraulics and aquifers; Application of Darcy’s law.
- Irrigation: Types of inigation systems and methods; Crop water requirements – Duty, delta, evapo-transpiration; Gravity Dams and Spillways; Lined and unlined canals, Design of weirs on permeable foundation; cross drainage structures.
Environmental Engineering
- Water and Waste Water Quality and Treatment: Basics of water quality standards – Physical, chemical and biological parameters; Water quality index; Unit processes and operations; Water requirement; Water distribution system; Drinking water treatment.
- Sewerage system design, the quantity of domestic wastewater, primary and secondary treatment. Effluent discharge standards; Sludge disposal; Reuse of treated sewage for different applications.
- Air Pollution: Types of pollutants, their sources, and impacts, air pollution control, air quality standards, Air Quality Index, and limits.
- Municipal Solid Wastes: Characteristics, generation, collection, and Transportation of solid wastes, engineered systems for solid waste management (reuse/ recycle, energy recovery, treatment, and disposal).
Transportation Engineering
- Transportation Infrastructure: Geometric design of highways – cross-sectional elements, sight distances, horizontal and vertical alignments.
- The geometric design of railway Track – Speed and Cant.
- Concept of airport runway length, calculations, and connections; taxiway and exit taxiway design.
- Highway Pavements: Highway materials – desirable properties of bituminous paving mixes; Design factors for flexible Design of flexible and rigid pavement using IRC codes
- Traffic Engineering: Traffic studies on flow and speed, peak hour factor, accident study, statistical analysis of traffic data; Microscopic and macroscopic parameters of traffic flow, fundamental relationships; Traffic signs; Signal design by Webster’s method; Types of intersections; Highway capacity.
Geomatics Engineering
Principles of surveying; Enors and their adjustment; Maps – scale, coordinate system; Distance and angle measurement – Levelling and trigonometric levelling; Traversing and triangulation survey; Total station; Horizontal and vertical curves. Photogrammetry and Remote Sensing – Scale, flying height; Basics of remote sensing and GIS.
Stay connected with us @ FreshersNow.Com for the latest updates like HPSC SDE Syllabus 2024.
★★ You Can Also Check ★★ | |
HPSC Recruitment Notification | Haryana Govt Jobs |
Haryana Employment News | Engineering Govt Jobs |
HPSC Sub Divisional Engineer Syllabus 2024 – FAQs
How many questions will be there in HPSC SDE Stage 1 Exam?
100 Questions will be there in HPSC SDE Stage 1 Exam.
What is the time duration for HPSC SDE Stage 1 Exam?
2 hrs is the time duration for HPSC SDE Exam.
Is there any negative marking for HPSC SDE Screening Test?
Yes, there is a negative marking of One-fourth mark for each wrong answer in HPSC SDE Screening Test.
For how many marks the HPSC Sub Divisional Engineer Stage 2 exam will be conducted?
HPSC Sub Divisional Engineer Stage 2 exam will be conducted for 150 marks.